ironingboardcovers.co.uk

REPLACEMENT COVER FOR

BELDRAY IRONING BOARD

This is cover is for Beldray boards which have an ironing plate at the blunt end that prevents the cover tucking under. The drawstrings need to be pulled from the corners & then tied under the board. Drawstrings can fit a wider range of sizes because they can be pulled tight to the board. £3.85 UK POSTAGE
All our products are Designed, Printed and Made in Britain
For the ARGOS folding board we will need the dimensions L x W x D & to check we are sending the correct cover. £3.85 UK POSTAGE NB: PLEASE MEASURE THE IRONING SURFACE OF YOUR BOARD L = Length W = Width D = Depth of the sides (thickness)
Made to Measure Replacement cover for Shirtmaster board
PLEASE NOTE! WE NEED THESE MEASUREMENTS SO WE CAN MAKE SURE THE COVER WE SEND WILL FIT YOUR BOARD MEASURE THE IRONING SURFACE OF YOUR BOARD
Open end - Drawsrings at blunt end corners
Additional Felt pad for your ironing board
L = Length W = Width D = Depth of the sides (thickness)

REPLACEMENT COVER FOR ARGOS FOLDING IRONING BOARD

REPLACEMENT COVER FOR

SHIRTMASTER BOARD

Choose a design for your Shirtmaster ironing board

This is a replacement cover for the Shirtmaster

bottle shaped ironing board.

The cover is made from 100% cotton which is

backed with felt and ties with a drawstring at

the nose end.

We ask you to enter the width (at the widest

point of the board) & length & depth of the

ironing surface in cm so we can confirm we are

sending the correct sized cover for you.

£3.75 UK POSTAGE for whole order

NB: MEASURE THE IRONING SURFACE OF YOUR

BOARD

L = Length W = Width D = Depth of the sides

(thickness)

FELT PAD - EXTRA PADDING

The synthetic felt pad is designed to lay under your cover to give extra padding to the ironing surface. All our covers come with felt padding attached but you may need need a bit extra. Especially useful under mesh boards to stop the mesh from marking the clothes. The pad is a 50 x 150 cm rectangle and you will need to cut down it to fit your board. The pad is about 4mm deep and when combined with our felt backed covers it gives a depth of about 8mm. When this is posted it can get squashed quite flat but will still do the job of adding extra padding. Washable at 30 degrees. £3.75 UK POSTAGE for whole order

DISPATCH EMAIL WILL BE SENT WHEN COVER IS POSTED…

CONTACT US ORDERS@IRONINGBOARDCOVERS.CO.UK 0330 0435679
OUR MADE TO MEASURE SERVICE HAS NOW ENDED WE STILL SELL COVERS FOR Shirtmaster Beldray Argos folding boards

HALF PRICE SALE ON

KITCHEN TEXTILES

DESIGNS
GREY RIPPLE
SILVER METALIC
ironingboardcovers.co.uk

We make Made to Measure replacement covers for

all makes, shapes & sizes of board.

Shirtmaster - Beldray

- Leifheit - Minky - Brabantia - Argos - Ikea

folding board - steam press - sleeve boards & more!

STANDARD SHAPE IRONING

COVER - MADE TO MEASURE

There are several options to fit the cover. Choose a fit method from the options below & specify your design choice with the dropdown menu. Drawstring fits tend to work better as they can be pulled really tight to the board. 1. Open end - Drawsrings at blunt end corners This is a option is good for Beldray boards which have an ironing plate at the blunt end that prevents the cover tucking under. The drawstrings need to be pulled from the corners & then tied under the board. 2. Continuous - Drawstrings all the way ,,,,around the cover that tie at the nose end of the board This is a good option if you dont want to send a template for an elastic cover. This cover needs to tuck under the board all the way around. 3. Elastic all the way around the board With the elastic fit we prefer you to send us a template to ensure a perfect fit as it not possible to tighten the elastic once the cover is made. We prefer you to send us a template of your board to make an elastic fit cover to ensure a good fit. The standard bullet shaped cover is made from 100% cotton fabric which is backed with 5mm padding. All our covers are washable at 30 degrees and are suitable for dry or steam iron. £3.75 UK P&P

SHIRTMASTER COVER

SLEEVE BOARD COVER

EXTRA FELT PADDING

The synthetic felt pad is designed to lay under your cover to give extra padding to the ironing surface. Especially useful under mesh boards to reduce the mesh from marking the clothes. The pad is a 50 x 150 cm rectangle and you will need to cut down it to fit your board. The pad is about 4mm deep and when combined with our felt backed covers it gives a depth of about 8mm. Washable at 30 degrees. £3.75 uk P&P

TABLE TOP COVER

NON STANDARD BOARD

Any cover which is not a

standard bullet shape such as:

A curve on one side of the board

and not the other

- Asymmetrical in any way

- A board which folds in half

We ask you to draw a paper template

by drawing around the boards ironing

surface by laying it down onto paper

(newspaper is fine) and cutting out the shape. It can

be folded into an envelope. Or you can send the

previous cover. This will be used as the pattern for the

new cover.

£3.75 UK P&P

1
2
3
L = Length W = Width D = Depth of the sides
L = Length W = Width D = Depth of the sides
Made to Measure Replacement cover for Shirtmaster board LENGTH WIDTH DEPTH

Please write your order number plus your name and

address onto the template so we can match it with

your order.

If you do need to send a template or previous cover for us to use as a pattern please write your order number plus your name and address on it so we can match it with your order. More instructions on templates here

HEAT PRESS IRON (STEAM & DRY)

FOLDING IRONING BOARDS

A board which folds in half For a folding board we will need the dimensions L x W x D & may need a template or previous cover but we will contact you to let you know if we do. Place your order and put the brand name & model name if you know it into the notes during the order process, ie Argos - Home folding board £3.75 UK P&P L = Length W = Width D = Depth of the sides

More instructions

on templates

here

This is a made to measure

replacement cover for the

Shirtmaster bottle shaped ironing

board.

The cover is made from 100% cotton

which is backed with felt and ties

with a drawstring at the nose end.

We ask you to enter the width (at

the widest point of the board) &

length & depth of the ironing

surface in cm so we can confirm we

are making up the correct sized

cover for you.

£3.75 UK P&P

If you would like a sleeve board cover made up to match your ironing cover please draw a paper template by drawing around the boards ironing surface by laying it down onto paper (newspaper is fine) and cutting out the shape. It can be folded into an envelope.
L = Length W = Width D = Depth of the sides Please write your order number plus your name and address onto the template so we can match it with your order. More instructions on templates here
Suitable for a table top or any rectangular ironing surface which you wish to use as an ironing surface. Please supply the dimensions of the table, length, width & depth in cm. We also need to know if it needs to be fitted with a drawstring or elastic or any other fitting method. No payment will be taken when you place this order. We we will get back to you with a cost based on the measurements you give. We will send an invoice once the order is confirmed by you.
We can provide a replacement cover for the bottom plate. We will need the dimensions of the plate. Our covers are backed with felt or foam. £3.75 UK POSTAGE NB: PLEASE MEASURE THE IRONING SURFACE OF YOUR BOARD L = Length W = Width D = Depth (thickness)

BOTTLE BOARD COVER

This is a made to measure

replacement cover for the Bottle

board, bottle shaped ironing board.

The cover is made from 100% cotton

which is backed with felt and ties

with a drawstring at the nose end.

We ask you to enter the width (at the

widest point of the board) & length

& depth of the ironing surface in cm

so we can confirm we are making up

the correct cover for you

£3.75 UK P&P

HAVING TROUBLE FINDING AN IRONING

BOARD COVER THAT FITS?

YOUR SEARCH IS OVER!

All our products are Designed, Printed and Made in Britain
CONTACT US 0330 0435679 ORDERS@IRONINGBOARDCOVERS.CO.UK
NEXT COVERS WILL BE SENT OUT DURING WEEK STARTING 11TH JAN DISPATCH EMAIL WILL BE SENT WHEN COVER IS POSTED
SiteLock